If you have a Cisco 300-180 certification, your work will have a lot of change that wages and work position will increase quickly.Passtcert is a website which can give much convenience and meet the needs and achieve dreams for many people participating IT certification exams. If you are still worrying about passing some IT certification exams, please choose Passtcert cisco certification 300-180 study material to help you.
Share some CCNP Data Center 300-180 exam questions and answers below.
Which protocols can be used to send to Cisco TAC (Technical Assistance Center) the show tech-support command output information about the Cisco UCS domain? (Choose two.)
A. TFTP
B. FTP
C. SCP
D. Telnet
E. SecureTelnet
Answer: B, C
When using the Cisco UCS Manager GUI to troubleshoot a suspected bad memory, which logs contain data that are related to the faulty DIMM?
A. the System Event log and Faults log that are located under the Admin tab
B. the Events log and Faults log that are located under the Admin tab
C. the System Event log that is located under the Server tab in the Navigation panel and the Faults log that is located under the Admin tab
D. the System Event log that is located under the Equipment tab and the Faults log that is located under the Admin tab
Answer: D
Which four tech support files can you create with the Cisco UCS Manager that you can submit to Cisco TAC for support? (Choose four.)
A. UCSM
B. disk LUNs
C. fabric extender
D. memory
E. rack server
F. chassis
G. server cache
Answer: A, C, E, F
During a password recovery of a Cisco UCS system in a cluster configuration, what happens to blade traffic?
A. There is no interruption to traffic, as the fabrics go down one at a time.
B. Traffic stops flowing until the process is complete.
C. There is no interruption to traffic because both fabrics stay up the whole time.
D. Traffic will continue to flow, but at a limited rate until the process is complete.
Answer: B
Topic 1, Questions Set 1
A customer is trying to boot an operating system that is installed on the eUSB on a Cisco UCS B-Series blade server; however, the boot fails.
What is the cause of this failure?
A. The local disk must be the first device in the boot order.
B. eUSB is not a supported boot device.
C. eUSB support is available only on the Cisco UCS C-Series rack server.
D. eUSB is not the first device in the boot order for the server.
Answer: D
While attempting to boot a Cisco UCS server from SAN, you are unable to see the LUN.
Which of these are causing the problem? (Choose three.)
A. VHBA template
B. RAID policy
C. zoning
D. LUN ID
E. vACLs
F. disjoint fabrics
Answer: A, C, D
Our practice questions and answers have high accuracy. Our cisco certification 300-180 study material have wide coverage of the content of the examination and constantly update and compile. Passtcert can provide you with a very high accuracy of exam preparation. Selecting Passtcert cisco certification 300-180 study material can save you a lot of time, so that you can get the CCNP Data Center 300-180 certification earlier to allow you to become a Cisco IT professionals.Cisco300-180 exam is a Technical Specialist exam. Cisco 300-180 exam can help and promote IT staff have a good career.
No comments:
Post a Comment