Cisco 300-180 certification exam is among those popular IT certifications. It is also the dream of ambitious IT professionals. This part of the candidates need to be fully prepared to allow them to get the highest score in the 300-180 exam, make their own configuration files compatible with market demand.In order to protect the vital interests of each IT certification exams candidate, Passtcert provides high-quality cisco certification 300-180 study material.
If you have a Cisco 300-180 certification, your work will have a lot of change that wages and work position will increase quickly.Passtcert is a website which can give much convenience and meet the needs and achieve dreams for many people participating IT certification exams. If you are still worrying about passing some IT certification exams, please choose Passtcert cisco certification 300-180 study material to help you. Share some CCNP Data Center 300-180 exam questions and answers below. Which protocols can be used to send to Cisco TAC (Technical Assistance Center) the show tech-support command output information about the Cisco UCS domain? (Choose two.) A. TFTP B. FTP C. SCP D. Telnet E. SecureTelnet Answer: B, C
When using the Cisco UCS Manager GUI to troubleshoot a suspected bad memory, which logs contain data that are related to the faulty DIMM? A. the System Event log and Faults log that are located under the Admin tab B. the Events log and Faults log that are located under the Admin tab C. the System Event log that is located under the Server tab in the Navigation panel and the Faults log that is located under the Admin tab D. the System Event log that is located under the Equipment tab and the Faults log that is located under the Admin tab Answer: D
Which four tech support files can you create with the Cisco UCS Manager that you can submit to Cisco TAC for support? (Choose four.) A. UCSM B. disk LUNs C. fabric extender D. memory E. rack server F. chassis G. server cache Answer: A, C, E, F
During a password recovery of a Cisco UCS system in a cluster configuration, what happens to blade traffic? A. There is no interruption to traffic, as the fabrics go down one at a time. B. Traffic stops flowing until the process is complete. C. There is no interruption to traffic because both fabrics stay up the whole time. D. Traffic will continue to flow, but at a limited rate until the process is complete. Answer: B
Topic 1, Questions Set 1
A customer is trying to boot an operating system that is installed on the eUSB on a Cisco UCS B-Series blade server; however, the boot fails. What is the cause of this failure? A. The local disk must be the first device in the boot order. B. eUSB is not a supported boot device. C. eUSB support is available only on the Cisco UCS C-Series rack server. D. eUSB is not the first device in the boot order for the server. Answer: D
While attempting to boot a Cisco UCS server from SAN, you are unable to see the LUN. Which of these are causing the problem? (Choose three.) A. VHBA template B. RAID policy C. zoning D. LUN ID E. vACLs F. disjoint fabrics Answer: A, C, D
Our practice questions and answers have high accuracy. Our cisco certification 300-180 study material have wide coverage of the content of the examination and constantly update and compile. Passtcert can provide you with a very high accuracy of exam preparation. Selecting Passtcert cisco certification 300-180 study material can save you a lot of time, so that you can get the CCNP Data Center 300-180 certification earlier to allow you to become a Cisco IT professionals.Cisco300-180 exam is a Technical Specialist exam. Cisco 300-180 exam can help and promote IT staff have a good career.
Passtcert provide different CCNA Collaboration 210-060 CICD exam to prepare for the Cisco 210-060 exam. The preparation guide includes courses, practice test, test engine and part free PDF download.In this era, everything is on the rise. Do not you want to break you own? Double your salary, which is not impossible. Through the Cisco 210-060 exam, you will get what you want. Passtcert will provide you with the best CCNA Collaboration 210-060 CICD exam, and make you pass the exam and get the certification.
Share some CCNA Collaboration 210-060 exam questions and answers below. An engineer receives a service ticket because a user cannot log into Cisco Unified CM User Options. Where can the engineer verify that the user account is active? A. LDAP System Configuration B. LDAP Directory C. End User Configuration D. LDAP Authentication E. Route Plan Report Answer: C
Which two technologies comprise a Cisco Presence deployment? (Choose two.) A. Cisco Unified Presence Server B. Cisco Unity Connection C. Cisco Unified Communications Manager D. Active Directory E. Cisco Unified Border Element F. Cisco Expressway Answer: A,C
Which Cisco Unified Communications Manager device report provides key information to determine if an additional gateway is needed? A. Gateway utilization B. Gateway summary C. Gateway detail D. Gateway and line group utilization Answer: A
An engineer wants to ensure that Cisco Jabber clients can communicate with instant messaging clients who are not registered to the same Jabber cluster. Which technology meets this requirement? A. intercluster trunk B. federation C. SIP trunk D. PRI Answer: B
Which component is needed to facilitate the connection between Cisco Unified Communications Manager and Cisco Unified Presence Server? A. SIP trunk B. H.323 gateway C. Gatekeeper D. MGCP gateway E. Cisco Unified Border Element Answer: A
An administrator wants to verify that a new PRI is properly connected to the PSTN status. Which Layer 2 status should be seen? A. MULTIPLE_FRAME_ESTABLISHED B. TEI_ASSIGNED C. LINK_UP D. CONTROLLER_UP Answer: A
Which four fields must an administrator complete to create a new user in Cisco Unity Connection? (Choose four.) A. Alias B. User type C. Extension D. Corporate email address E. First name F. Last name G. Employee ID H. Template Answer: A,B,C,H
An SCCP IP phone places a call to a SIP phone that is registered to the same Cisco Unified Communications Manager Express. During the active call, call waiting indicates a second call is incoming to the handset, but the user decides to ignore it. In this scenario, what is the combined total number of signaling conversations and media flows that used the SCCP phone as an endpoint? A. 2 B. 3 C. 4 D. 5 E. 6 Answer: B
After the advent of the Passtcert latest CCNA Collaboration 210-060 CICD exam, passing CCNA Collaboration certification 210-060 exam is no longer a dream of the IT staff. All of Passtcert practice questions and answers about Cisco certification 210-060 exam have high quality and 95% similarity with the real exam questions. Passtcert is worthful to choose. If you choose Passtcert CCNA Collaboration 210-060 CICD exam, you will be well prepared for 210-060 Implementing Cisco Collaboration Devices v1.0 exam and then successfully pass the exam.
Our CCNA Collaboration 210-060 CICD exam are the latest study materials which bring by experts. We help you achieve your success. You can get the most detailed and accurate exam questions and answers from us. Our CCNA Collaboration 210-060 CICD exam are updated in a timely manner in accordance with the changing of Exam Objectives. In fact, the success is not far away, go down along with Passtcert, then you will come to the road to success. Related article: http://h13-531.blogspot.com/2017/09/valid-210-060-cicd-ccna-collaboration.html
Passtcert be able to help you pass Cisco certification 300-135 exam successfully.Passtcert senior experts have developed Cisco 300-135 TSHOOT questions answers pdf with their knowledge and experience, which have 95% similarity with the real exam. I believe that you will be very confident of our products. If you choose to use Passtcert Cisco 300-135 TSHOOT questions answers pdf, Passtcert can help you 100% pass your first time to attend Cisco certification 300-135 exam.
Share some CCNP 300-135 exam questions and answers below. What is the solution of the fault condition? A. Under the BGP process,enter the bgp redistribute-internal command B. Under the BGP process, bgp confederation identifier 65001 command C. Delete the current BGP process and reenter all of the commands using 65002 as theAS number. D. Under the BGP process, delete the neighbor 209.56.200.226 remote-as 65002 command enter the neighbor 209.65.200.226 remote-as 65002 command. Answer: D
Ticket 5 R1ACL
TROUBLE TICKET STATEMENT: The implementation group has been using thetest bed to do a ¡®proof-of-concept¡¯that required both client 1 and client 2 to access the Web Server at 209.65.200.241.After several changed to interface status, network addressing, routing schemes and layer 2 connectivity, at trouble ticket has been opened indicating that client 1 cannot ping the 209.65.200.241 (internet Server). show run by yourself to obtain the following information: Client 1 is not able to reach the WebServer at 209.65.200.241. Initial troubleshooting shows that R1 is also not able to reach the WebServer. R1 also does not have any active BGP neighbor. Configuration on R1 ! interface Serial0/0/0/1 description link to ISP ip address 209.65.200.224 255.255.255.252 ip access-group edge_security in ip nat outside ip virtual-reassembly ntp brasdcast client net broadcast key 1 no cdp enable !! ip access-list nat_traffic permit 10.1.0.0 0.0.255.255 ip access-list nat_traffic permit 10.2.0.0 0.0.255.255 ! ip access-list edge_security deny ip 10.0.0.0 0.255.255.255 any ip access-list edge_security deny ip 172.16.0.0 0.15.255.255 any ip access-list edge_security deny ip 192.168.0.0 0.0.255.255 any ip access-list edge_security deny ip 127.0.0.0 0.255.255.255 any ip access-list edge_security permit ip host 209.65.200.241 any
On which device is the fault condition located? A. R1 B. R2 C. R3 D. R4 E. DSW1 F. DSW2 G. ASW1 Answer: A
What is the solution of the fault condition? A. Under the interface Serial0/0/0 configuration enter the ip nat inside command B. Under the interface Serial0/0/1 configuration enter the ip nat outside command C. Under the ip access-list standar nat_trafic configuration enter the permit 10.2.0.0 0.0.255.255 command D. Under the ip access-list standar nat_trafic configuration enter the permit 209.65.200.0 0.0.0.255 command Answer: C
The fault condition is related to which technology? A. NTP B. IPv4 OSPF Routing C. IPv6 OSPF Routing D. IPV4 and IPV6 Interoperability E. IPv4 layer 3 security Answer: D
What is the solution to the fault condition? A. Under the interface Tunnel34 configuration delete the tunnel mode ipv6 command. B. Under the interface Serial0/0/0.34 configuration enter the ipv6 address 2026::34:1/122 command. C. Under the interface Tunnel34 configuration enter the ip address unnumbered Serial0/0/0.34 command. D. Under the interface Tunnel34 configuration delete the tunnel source Serial0/0/0.34 command and enter the tunnel source 2026::34:1/122 command. Answer: A
R1 and R2 OSPF neighbor. Which two statements are true? (Choose two) (Output from show ip ospf neighbors on 2 routers, one of them shows FULL/DR, the other FULL/-, you need to know how were they configured and will they exchange routes) A. They are not neighbors B. R1 (non-DR) will not update its routes to R2 C. Router R2 is configured with ospf point-to-point command (R2 is the router that shows as FULL/-) D. They need to be configured as OSPF NBMA E. R2 should be configured as stub Answer: BC
The Fault Condition is related to which technology? A. BGP B. NTP C. IP NAT D. IPv4 OSPF Routing E. IPv4 OSPF Redistribution F. IPv6 OSPF Routing G. IPv4 layer 3 security Answer: A
What is the solution to the fault condition? A. Under the interface Tunnel34 configuration enter the ipv6 ospf 6 area 34 command. B. Under the interface Loopback6 configuration enter the ipv6 ospf 6 area 34 command. C. Under the interface Serial0/0/0.34 configuration enter the ipv6 ospf 6 area 34 command. D. Under ipv6 router ospf 6 configuration enter the redistribute rip RIP_ZONE include-connected command. Answer: D
What is the MTU¡¯s size in a GRE tunnel? A. 1630 B. 1476 C. 1500 D. 1900 Answer: B
Nowadays in this talented society IT professionals are very popular, but the IT area are also very competitive. So many IT professionals through passing difficult IT certification exams to stabilize themselves. Passtcert is websites specifically provide convenience for candidates participating in the IT certification exams.Passtcert is a website to provide Cisco 300-135 TSHOOT questions answers pdf for people who attend IT certification exam examinee.
Never say you can not do it. This is my advice to everyone. Even if you think that you can not pass the demanding Cisco 300-135 exam. You can find a quick and convenient training tool to help you. Passtcert Cisco 300-135 TSHOOT questions answers pdf is a very good training materials. It can help you to pass the exam successfully. And its price is very reasonable, you will benefit from it. Quickly grab your hope, it is in the Passtcert Cisco 300-135 TSHOOT questions answers pdf. Related article: http://h13-531.blogspot.com/2017/09/update-cisco-ccnp-300-135-tshoot.html
A lot of IT people want to pass Cisco certification 200-125 exams. Thus they can obtain a better promotion opportunity in the IT industry, which can make their wages and life level improved. But in order to pass Cisco certification 200-125 exam many people spent a lot of time and energy to consolidate knowledge and didn't pass the exam. This is not cost-effective. If you choose Passtcert CCNA Routing and Switching 200-125 exam sample questions, you can save a lot of time and energy to consolidate knowledge, but can easily pass Cisco certification 200-125 exam.
Share some CCNA Routing and Switching 200-125 exam questions and answers below. For what two purposes does the Ethernet protocol use physical addresses? (Choose two.) A. to uniquely identify devices at Layer 2 B. to allow communication with devices on a different network C. to differentiate a Layer 2 frame from a Layer 3 packet D. to establish a priority system to determine which device gets to transmit first E. to allow communication between different devices on the same network F. to allow detection of a remote device when its physical address is unknown Answer: A,E
During which phase of PPPoE is PPP authentication performed? A. the PPP Session phase B. Phase 2 C. the Active Discovery phase D. the Authentication phase E. Phase 1 Answer: A
Which technology supports the stateless assignment of IPv6 addresses (Choose two) ? A. DNS B. DHCPv6 C. DHCP D. autoconfiguration Answer: BD
Which layer 2 protocol encapsulation type supports synchronous and asynchronous circuis and has built-in security mechanisms? A. Frame Relay B. HDLC C. x.25 D. PPP Answer: D
Which two statements about IPv6 router advertisement messages are true? (Choose two.) A. They use ICMPv6 type 134. B. The advertised prefix length must be 64 bits. C. The advertised prefix length must be 48 bits. D. They are sourced from the configured IPv6 interface address. E. Their destination is always the link-local address of the neighboring node. Answer: AB
What are types of IPv6 static routes? (Choose Three.) A. Recursive routes B. Directly connected routes C. Fully specified routes D. Advertised routes E. Virtual links F. Redistributed routes Answer: ABC
From related websites or books, you might also see some of the training materials, but Passtcert information about Cisco certification 200-125 exam is the most comprehensive, and can give you the best protection. Candidates who participate in the CCNA Routing and Switching certification 200-125 exam should select CCNA Routing and Switching 200-125 exam sample questions of Passtcert, because Passtcert is the best choice for you.Training materials in the Passtcert are the best training materials for the candidates. With Passtcert CCNA Routing and Switching 200-125 exam sample questions, you will pass the exam easily.
Cisco certification 200-125 exam is the first step for the IT employees to set foot on the road to improve their job. Passing Cisco certification 200-125 exam is the stepping stone towards your career peak. Passtcert CCNA Routing and Switching 200-125 exam sample questions can help you pass CCNA Routing and Switching certification 200-125 exam successfully.Practice what you preach is the beginning of success. Since you have chosen to participate in the demanding IT certification exam. Then you have to pay your actions, and achieve excellent results. Passtcert CCNA Routing and Switching 200-125 exam sample questions are the best training materials for this exam. With it you will have a key to success. Related article: http://h13-531.blogspot.com/2017/09/update-ccna-cisco-certified-network.html
Now many IT professionals agree that Network Appliance certification NS0-158 exam certificate is a stepping stone to the peak of the IT industry. NS0-158 NetApp Certified Data Administrator, ONTAP exam is an exam concerned by lots of IT professionals.Only to find ways to success, do not make excuses for failure. To pass the Network Appliance NS0-158 exam, in fact, is not so difficult, the key is what method you use. Passtcert Netapp NS0-158 dumps pdf are a good choice.
Share some Network Appliance NCDA Certification NS0-158 exam questions and answers below. A customer has configured SnapDrive for Windows to assist in creating Snapshot copies of a LUN. In SnapDrive, the transport protocol configuration uses the vsadminuser account for authentication. SnapDrive fails to connect to the SVM. Why did this failure occur? A. Transport protocol requires a domain Windows account. B. The vsadmin account is locked or does not have a password. C. SnapDrive requires a cluster-wide privileged account. D. Transport protocol requires a local Windows account. Answer: B
An administrator is working with an application group to resolve a performance problem within the environment. They are experiencing slow read speeds and are trying to determine what could be done to improve performance. What would you add to the system to improve performance? A. NVRAM B. FlashCache C. RAM D. processors Answer: B
A customer created a volume with the wrong language code. What should a customer do to correct this problem? A. Delete the volume and create a volume with the correct language code. B. Take the volume offline and change the language code. C. Change the language code on the volume. D. Change the language code on the parent storage virtual machine. Answer: A
A customer creates four broadcast domains with the following ports included for node cl-01: bcast1 ¨C e0c bcast2 ¨C e0d bcast3 ¨C e0e bcast4 ¨C e0f A customer creates a LIF and specifies a home port of cl-01:e0f. After LIF creation, the administrator modifies the home port to use cl-01:e0c. Which broadcast domain is the LIF using now? A. bcast4 B. bcast2 C. bcast1 D. bcast3 Answer: C
Which command would you use to disable an account in clustered Data ONTAP? A. security login lock B. security login policy C. security login domain-tunnel D. security login modify Answer: A
Which data protocol is available to use on an SVM? A. FTP B. CIFS C. HTTP D. TFTP Answer: B
Which port is used for untagged VLAN traffic? A. a0a-0 B. a0a C. e0a-999 D. 0a Answer: B
We will be 100% providing you convenience and guarantee. Remember that making you 100% pass Network Appliance certification NS0-158 exam is Passtcert.The Netapp NS0-158 dumps pdf of the Passtcert is specifically designed for candicates. It is a professional exam materials that the IT elite team specially tailored for you. Passed the exam certification in the IT industry will be reflected in international value. There are many Netapp NS0-158 dumps pdf providers that would guarantee you pass the Network Appliance NS0-158 exam.
Passtcert Netapp NS0-158 dumps pdf can help you save a lot of your precious time and energy.Passtcert is a website which can give much convenience and meet the needs and achieve dreams for many people participating IT certification exams. If you are still worrying about passing some IT certification exams, please choose Passtcert to help you. Passtcert can make you feel at ease, because we have a lot of Netapp NS0-158 dumps pdf with high quality, coverage of the outline and pertinence, too, which will bring you a lot of help. You won't regret to choose Passtcert, it can help you build your dream career.As we all know, Passtcert Netapp NS0-158 dumps pdf have very high profile, and it is also well-known in the worldwide. Related article: http://h13-531.blogspot.com/2017/09/update-netapp-certification-ns0-158.html
The Passtcert Cisco Certification 300-320 ARCH real exam questions are authorized products by vendors, it is wide coverage, and can save you a lot of time and effort.How to get to heaven? Shortcart is only one. Which is using Passtcert Cisco Certification 300-320 ARCH real exam questions. This is the advice to every IT candidate, and hope you can reach your dream of paradise.You can free download part of Passtcert Cisco Certification 300-320 ARCH real exam questions, as an attempt to test our quality.
Share some CCDP 300-320 exam questions and answers below. Which protocol should be run on the LAN side of two edge routers (that are terminating primary and backup WAN circuits) to provide quick failover in case of primary WAN circuit failure? A. VTP B. STP C. VRRP D. RIP Answer: C
Which technology can block interfaces and provide a loop-free topology? A. STP B. VSS C. VLAN D. vPC Answer: A
Which two modes does LACP support? (Choose two.) A. on B. passive C. associated D. link Answer: A, B
The direction of the flow of multicast traffic is based on which protocol? A. PIM B. IGMP C. underlying IGP D. MSDP Answer: C
Which option describes why duplicate IP addresses reside on the same network in Cisco network design? A. HSRP designed network B. Using Cisco ACE in active/passive mode C. VRRP designed network D. Running multiple routing protocols Answer: B
A network administrator wants to provide high availability in a data center environment by making sure that there is no reconvergence of Layer 2 and Layer 3 protocols when there is a Layer 3 switch failure. Which Cisco Nexus feature fulfills this purpose? A. ISSU B. VSS C. vPC D. MEC Answer: C
What is one reason to implement Control Plane Policing? A. allow OSPF routing protocol to advertise routes B. protect the network device route processor from getting overloaded by rate limiting the incoming control plane packets C. allow network devices to generate and receive packets D. protect the data plane packets Answer: B
Passtcert Cisco Certification 300-320 ARCH real exam questions praised by the majority of candidates is not a recent thing. This shows Passtcert Cisco Certification 300-320 ARCH real exam questions can indeed help the candidates to pass the exam. Compared to other questions providers, Passtcert Cisco Certification 300-320 ARCH real exam questions have been far ahead. uestions broad consumer recognition and reputation, it has gained a public praise.
And the real ability is exercised in practice, it is not necessarily linked with the academic qualifications. Do not feel that you have no ability, and don't doubt yourself. When you choose to participate in the Cisco 300-320 exam, it is necessary to pass it. If you are concerned about the test, however, you can choose Passtcert Cisco Certification 300-320 ARCH real exam questions. No matter how low your qualifications, you can easily understand the content of the training materials. And you can pass the exam successfully. Related article: http://h31-311-enu.blogspot.com/2017/09/cisco-ccdp-300-320-arch-study-guides.html
